View LTM201M1-L01_3669290.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1bhf @-5..- .0%&- product information product information samsung tft-lcd product information model : LTM201M1-L01 samsung tft samsung tft - - lcd product information lcd product information model model : ltm201m1 : ltm201m1 - - l01 l01 issued date : 2005-01-05 lcd application engineering 2, tcs team samsung electronics co . , ltd. note : this is product information is subjec t to change after 3 months of issuing date. www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..- .0%&- product information product information contents general description --------------- ----------------------- ---------------- --------------- ------------ (3) 1. absolute maximum ratings ------------------ ----------------- ------------------ -------------- (4) 2. optical characteristics ------ -------------------- ----------------- ------------------ -------------- (6) 3. electrical characteristics -- ------------------- ------------------ ---------------- --------------- (12) 3.1 tft lcd module 3.2 back light unit 4. block diagram ---------------- ------------------ ------------------ ---------------- --------------- (17) 4.1 tft lcd module 4.2 back light unit 5. input terminal pin assignment --------------------- ----------------------- ------------------ (18) 5.1 input signal & power 5.2 lvds interface 5.3 back light unit 5.4 input signals, basic display colo rs and gray scale of each color 6. interface timing ------- ------------------- -------------------- ------------------- ---------------- (27) 6.1 timing parameters (de only mode) 6.2 timing diagrams of inte rface signal (de only mode) 6.3 power on/off sequence 6.4 lvds input characteristics 6.5 vdd power dip condition 7. outline dimension ---- -------------------- -------------------- ------------------- ---------------- (31) 8. general precaution -- -------------------- -------------------- ------------------- --------------- (34) 8.1 handling 8.2 storage 8.3 operation 8.4 others www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..- .0%&- product information product information general description LTM201M1-L01 is a color active matrix liquid crystal display (lcd) that uses amorphous silicon tft (thin film transistor) as swit ching components. this model is composed of a tft lcd panel, a driver circuit and a back lig ht unit. the resolution of a 20.1? is 1680 x 1050 and this model can display up to 16.7 millions colors. ? workstation & desktop monitors ? display terminals for av application products ? monitors for industrial machine * if the module is used to other applicati ons besides the above, please contact sec in advance. features description applications ? high contrast ratio, high aperture structure ? s-pva (super patterned vertical alignment) mode ? wide viewing angle ? high speed response ? wsxga+ (1680 x 1050 pixels) resolution ? edge type 6 ccfts (cold cathod fluorescent tube) ? de (data enable) mode ? lvds (low voltage differential signaling) interface (2pixel/clock) ? rohs compliance ? pb-free compliance general information mm 0.258(h) x 0.258(w) pixel pitch mm 433.44(h) x 270.9(v) active display area note haze 44% , hard-coating (3h) surface treatment cd/ ] 300(typ.) luminance of white normally black display mode rgb vertical stripe pixel arrangement pixel 1,680 x 1,050 number of pixels colors 16.7m (true 8-bit) display colors unit specification items www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..- .0%&- product information product information note (1) mechanic al tolerance is ? 0.5mm unless there is a special comment. mechanical information 3,100 23.3 296.9 459.9 max. lcd module only g - - weight mm - - depth (d) mm 296.4 295.9 vertical (v) w/o inverter ass?y mm 459.4 458.9 horizontal (h) module size note unit typ. min. item v 13.2 gnd-0.3 v dd power supply voltage (3) g 1.5 - v nop vibration ( non - operating ) (2) g 50 - s nop shock ( non - operating ) ? 50 0 t opr glass surface temperature (operation condition) (1) ? 60 -25 t stg storage temperature note unit max. min. symbol item 1. absolute maximum ratings if the condition exceeds maximum ratings, it can cause malfunction or unrecoverable damage to the device. note (1) ta= 25 ? 2 ? c www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..- .0%&- product information product information (1) temperature and relative humidity range are shown in the figure below. a. 90 % rh max. (ta ? 39 ? c) b. maximum wet-bulb temperature at 39 ? c or less. (ta ? 39 ? c) c. no condensation (2) 11ms, sine wave, one time for ? x, ? y, ? z axis (3) 10-300 hz, sweep rate 10min, 30min for x,y,z axis fig. temperature and relative humidity range (39,90) (39,90) (60,27.7) (60,27.7) (50,50.4) (50,50.4) ( ( - - 25,5) 25,5) (39,90) (39,90) (60,27.7) (60,27.7) (50,50.4) (50,50.4) ( ( - - 25,5) 25,5) www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..- .0%&- product information product information 2. optical characteristics bm-7 msec - 12 - t g-g,long g-to-g sr-3 (7),(8) (6) sr-3 cd/m2 - 300 250 y l luminance of white (center of screen) - 8 - t g-g,avg (5) bm-7 25 16 - tr + tf on/off response time msec normal ? l,r =0 ? u,d =0 viewing angle (9) 0.02 - - ? u'v' white c.g.l - 0.468 - wv' - 0.198 - wu' white - 0.158 - bv' - 0.175 - bu' blue - 0.564 - gv' - 0.124 - gu' green - 0.523 - rv' - 0.451 - ru' red color chromaticity (cie 1976) 0.354 0.329 0.304 wy 0.338 0.313 0.288 wx white 0.085 0.060 0.035 by 0.175 0.150 0.125 bx blue 0.625 0.600 0.575 gy 0.315 0.290 0.265 gx green 0.355 0.330 0.305 ry 0.665 0.640 0.615 rx red color chromaticity (cie 1931) (3) sr-3 - 900 500 c/r contrast ratio (center of screen) note unit max. typ. min. condition symbol item * c.g.l : color grayscale linearity (continue to the next page) the optical characteristics should be measured in a dark r oom or equivalent. measuring equipment : topcon bm-7,spectroradiometer sr-3 (ta = 25 ? 2 ? c, vdd=5v, fv= 60hz, fdcl k=59.5mhz, il = 7.0marms) www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..- .0%&- product information product information (4) sr-3 % 25 - - b uni brightness uniformity (9 points) k - 6500 - - color temperature % - 72 - - color gamut note unit max. typ. min. condition symbol item - 65 - ? d - 65 - ? u ver. - 75 - ? r (8) sr-3 degrees - 75 - cr ? 100 ? l hor. viewing angle - 89 80 ? d - 89 80 ? u ver. - 89 80 ? r (8) sr-3 degrees - 89 80 cr ? 10 ? l hor. viewing angle note (1) test equipment setup the measurement should be executed in a stable, windless and dark room between 30min after lighting the back light at the given temperature for stabilization of the back light. this should be measured in the center of screen. single lamp current : 7.0ma environment condition : ta = 25 ? 2 ? c 2 ? bm-7 1 ? sr-3 field photo detector photo detector lcd panel tft - lcd module the center of the screen sr-3 : 50 y bm-7 : 50 y field www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..- .0%&- product information product information note (2) definition of test point note (3) definition of contrast ratio (c/r) : ratio of gray max (gmax) & gra y min (gmin) at the center point ? of the panel note (4) definition of 9 points brightness uniformity buni bb b = ? 100 (max min) max bmax : maximum brightness at all pixels white bmin : minimum brightness at all pixels white cr g g = max min gmax : luminance with all pixels white gmin : luminance with all pixels black 6 8 7 9 3 2 1 4 5 168 840 1512 105 525 945 active area : test point www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..- .0%&- product information product information note (5) definition of response time a. on/off response time : sum of tr, tf b. gray to gray response time - measuring gray : 31 ? 63, 63 ? 95,95 ? 127, 127 ? 159, 159 ? 191, 191 ? 223 grays and vice versa -t g-g, avg : average response time of ones between above grays -t g-g, long : longest response time of ones between above grays black (tft off) white (tft on) black (tft off) 100% 90% 10% 0% t r t f optical response display data 96 gray 128 gray 95 gray 127 gray gray to gray response black 0% 100% 10% 90% t r t f white (example) time www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..- .0%&- product information product information note (6) definition of lum inance of white : luminance of white at center point ? note (7) definition of color chromaticity (cie 1931, cie1976) color coordinate of red, green, blue & white at center point ? note (8) definition of viewing angle : viewing angle range (cr ? 10, cr ? 100) www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..- .0%&- product information product information note (9) color grayscale linearity a. test image : 100% full white patte rn with a test pattern as below b. test pattern : squares, 40mm by 40mm in size, filled with 255, 225, 195, 165, 135 and 105 grays steps should be arranged at the center of the screen. c. test method -1 st gray step : move a square of 255 gray level should be moved into the center of the screen and measure luminance and u? and v? coordinates. - next gray step : move a 225 gray s quare into the center and measure both luminance and coordinates, too. d. test evaluation where a, b : 2 gray levels found to have the largest color differences between them i.e. get the largest u? and v? of each 6 pair of u? and v? and calculate the u?v?. ? u' v' = (u' - u' ) + (v' - v' ) ab 2 ab 2 www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..- .0%&- product information product information 3. electrical characteristics 3.1 tft lcd module the connector for display data & timing signal should be connected. ta = 25 ? c common mode voltage input voltage range (single-ended) differential input voltage lvds skew differential input voltage for lvds receiver threshold (4) v 2.4 0 v in (4) v 2.4- |v id |/2 1.2 0+ |v id |/2 v cm (4) mv 600 200 |v id | (3) 300 -300 t skew (7) a 4.0 - - i rush rush current mhz 62.5 59.5 56.5 f dclk main frequency khz 69.3 64.8 60.4 f h hsync frequency hz 63 60 57 f v vsync frequency ma 1,100 900 - (c) dot ma - 750 - (b) white (5),(6) ma - 650 - i dd (a) black current of power supply mv - - -100 low (2) mv +100 - - high lvds input characteri stics (1) v 13.2 12 10.8 v dd voltage of power supply note unit max. typ. min. symbol item note (1) the ripple voltage shou ld be controlled under 10% of v dd . www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..- .0%&- product information product information (2) differential receiver voltage definitions and propag ation delay and transition time test circuit a. all input pulses have frequency = 10mhz, t r or t f =1ns b. c l includes all probe and fixture capacitance note a. note b. (4) definition of v id and v cm using single-end signals (3) lvds receiver dc parameters are m easured under static and steady conditions which may not be reflective of its performance in the end application. where tskew : skew between lvds clock & lvds data, t : 1 period time of lvds clock cf) (-/+) of 380psec means lvds dat a goes before or after lvds clock. differential lvds data rx +/- t skew t v diff = 0v v diff = 0v differential lvds clk www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..- .0%&- product information product information (5) fv=60hz, fdclk = 59.5mhz, vdd = 12.0v, dc current. (6) power dissipation check pattern (lcd module only) rush current i rush can be measured when t rush . is 470 k . t rush =470 k 100% gnd 90% 10% v dd (7) measurement condition a) black pattern b) white pattern c) dot pattern www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..- .0%&- product information product information the back light unit is a edge lighting with edge type 6 ccfts (cold cathode cathode fluorescent tube ). the characteristics of tw o dual lamps are shown in the following tables. ta=25 ? 2 ? c 25 ? : 1,250 (6) vrms 0 ? : 1,800 - - vs startup voltage 1.5554 1.414 1.2726 wdis distortion rate (5) % 10 - - wasy asymmetry rate inverter waveform (4) hour - - 50,000 hr operating life time (3) khz 60 - 40 f l lamp frequency vrms - 760 - v l lamp voltage (1) marms 7.5 7.0 4.0 i l lamp current note unit max. typ. min. symbol item note (1) specified values are for a single lamp. lamp current is measured with current meter for high frequency as shown below. refer to the following block diagram of the back light unit for more information. fig. measurement point of lamp current 3.2 back light unit hot (gray) cold (black) hot (blue) cold (yellow) hot (white) cold (white) inverter : fif2066-51d inverter lcd module a www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..- .0%&- product information product information (2) lamp frequency which may produce inte rference with horizontal synchronous frequency may cause line flow on the displa y. therefore lamp frequency should be detached from the horizontal synchronous frequency and its harmonics as far as possible in order to avoid interference. (3) life time (hr) is defined as the time when brightness of a lamp unit itself becomes 50% or less than its original val ue at the condition of ta = 25 ? 2 ? c and i l = 7.0marms (4) designing a system inverter intended to have better display performance, power efficiency and lamp reliability. they would help increase the lamp lifetime and reduce leakage current. a. the measurement should be done at typical lamp current. b. the asymmetry rate of the inve rter waveform s hould be less than 10%. c. the distortion rate of the waveform should be 2 2 with ? 10% tolerance. - inverter output waveform had better be more similar to ideal sine wave. || ii i rms p-p ? 100 ? asymmetry rate ? distortion rate (5) if an inverter has shutdown function, it should keep its output for over 1 second even if the lamp connector is open. ot herwise the lamps may not be turned on. fig. wave form of the inverter || i i rms p || i i rms -p or i p i -p www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..- .0%&- product information product information 4. block diagram 4.2 back light unit 4.1 tft lcd module connector : bhsr-02vs-1 or equivalent bhsr-05vs-1 or equivalent up side down side cn 2 lamp1 lamp 2 cn 3 lamp 3 lamp 4 cn 4 cn 5 lamp 5 lamp 6 up side down side cn 2 lamp1 lamp 2 cn 3 lamp 3 cn 2 lamp1 lamp 2 cn 3 lamp 3 lamp 4 cn 4 cn 5 lamp 5 lamp 6 lamp 4 cn 4 cn 5 lamp 5 lamp 6 cn1 cn2 cn3 cn4 dc power supply timing controller lcd dr i ve anal og circuit data driver(column) tft-lcd lvds ds90c 386 gat e dr i ver (row) lvds signals odd even input conne c front back front back www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..- .0%&- product information product information 5. input terminal pin assignment 5.1. input signal & power ( connector : uju is100-l30o-c23 or equivalent ) v dd 30 v dd 29 power supply : +12v v dd 28 ddc power : +3.3v nc 27 ddc data ctl 26 ddc clock ce 25 power ground gnd 24 positive transmi ssion data of pi xel 3 (even data) rxe3+ 23 negative transmission data of pixel 3 (even data) rxe3- 22 positive sampling clock (even data) rxec+ 21 negative sampling clock (even data) rxec- 20 positive transmi ssion data of pi xel 2 (even data) rxe2+ 19 negative transmission data of pixel 2 (even data) rxe2- 18 power ground gnd 17 positive transmi ssion data of pi xel 1 (even data) rxe1+ 16 negative transmission data of pixel 1 (even data) rxe1- 15 power ground gnd 14 positive transmi ssion data of pi xel 0 (even data) rxe0+ 13 negative transmission data of pixel 0 (even data) rxe0- 12 positive transmission data of pixel 3 (odd data) rxo3+ 11 negative transmission data of pixel 3 (odd data) rxo3- 10 positive sampling clock (odd data) rxoc+ 9 negative sampling clock (odd data) rxoc- 8 power ground gnd 7 positive transmission data of pixel 2 (odd data) rxo2+ 6 negative transmission data of pixel 2 (odd data) rxo2- 5 positive transmission data of pixel 1 (odd data) rxo1+ 4 negative transmission data of pixel 1 (odd data) rxo1- 3 positive transmission data of pixel 0 (odd data) rxo0+ 2 negative transmission data of pixel 0 (odd data) rxo0- 1 function symbol pin no www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..- .0%&- product information product information note) pin number starts from right side a. all gnd pins should be connected together and also be connected to the lcd?s metal chassis. b. all power input pins should be connected together. c. all nc pins should be separated from other signal or power. fig. connector diagram #1 #30 pin no. 1 pin no. 30 source pcb ? #1 #30 ? www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..- .0%&- product information product information 5.2 lvds interface 5.2.1 odd pixel data (1st pixel data) rxo3- rxo3+ no. 10 no. 11 txout3- txout3+ red odd pixel data ro6 txin27 50 blue odd pixel data bo5 txin22 24 blue odd pixel data bo4 txin21 23 blue odd pixel data bo3 txin20 22 rxo2- rxo2+ no. 5 no. 6 txout2- txout2+ blue odd pixel data bo2 txin19 20 rxo1- rxo1+ no. 3 no. 4 txout1- txout1+ blue odd pixel data bo1 txin18 19 blue odd pixel data (msb) bo7 txin17 18 rxo3- rxo3+ no. 10 no. 11 txout3- txout3+ blue odd pixel data bo6 txin16 16 blue odd pixel data (lsb) bo0 txin15 15 green odd pixel data go5 txin14 14 green odd pixel data go4 txin13 12 rxo1- rxo1+ no. 3 no. 4 txout1- txout1+ green odd pixel data go3 txin12 11 green odd pixel data (msb) go7 txin11 10 rxo3- rxo3+ no. 10 no. 11 txout3- txout3+ green odd pixel data go6 txin10 8 green odd pixel data go2 txin9 7 rxo1- rxo1+ no. 3 no. 4 txout1- txout1+ green odd pixel data go1 txin8 6 green odd pixel data (lsb) go0 txin7 4 rxo0- rxo0+ no. 1 no. 2 txout0- txout0+ red odd pixel data ro5 txin6 3 rxo3- rxo3+ no. 10 no. 11 txout3- txout3+ red odd pixel data (msb) ro7 txin5 2 red odd pixel data ro4 txin4 56 red odd pixel data ro3 txin3 55 red odd pixel data ro2 txin2 54 red odd pixel data ro1 txin1 52 rxo0- rxo0+ no. 1 no. 2 txout0- txout0+ red odd pixel data (lsb) ro0 txin0 51 symbol terminal function symbol symbol no to ltm201m1 interface ( cn1 ) output signal device input signal device input pin 1st lvds transmitter ( ds90c383, ds90c385 ) signal interface www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..- .0%&- product information product information 5.2.2 even pixel data (2nd pixel data) rxe3- rxe3+ no. 22 no. 23 txout3- txout3+ red even pixel data re6 txin27 50 blue even pixel data be5 txin22 24 blue even pixel data be4 txin21 23 blue even pixel data be3 txin20 22 rxe2- rxe2+ no. 18 no. 19 txout2- txout2+ blue even pixel data be2 txin19 20 rxe1- rxe1+ no. 15 no. 16 txout1- txout1+ blue even pixel data be1 txin18 19 blue even pixel data (msb) be7 txin17 18 rxe3- rxe3+ no. 22 no. 23 txout3- txout3+ blue even pixel data be6 txin16 16 blue even pixel data (lsb) be0 txin15 15 green even pixel data ge5 txin14 14 green even pixel data ge4 txin13 12 rxe1- rxe1+ no. 15 no. 16 txout1- txout1+ green even pixel data ge3 txin12 11 green even pixel data (msb) ge7 txin11 10 rxe3- rxe3+ no. 22 no. 23 txout3- txout3+ green even pixel data ge6 txin10 8 green even pixel data ge2 txin9 7 rxe1- rxe1+ no. 15 no. 16 txout1- txout1+ green even pixel data ge1 txin8 6 green even pixel data (lsb) ge0 txin7 4 rxe0- rxe0+ no. 12 no. 13 txout0- txout0+ red even pixel data re5 txin6 3 rxe3- rxe3+ no. 22 no. 23 txout3- txout3+ red even pixel data (msb) re7 txin5 2 red even pixel data re4 txin4 56 red even pixel data re3 txin3 55 red even pixel data re2 txin2 54 red even pixel data re1 txin1 52 rxe0- rxe0+ no. 12 no. 13 txout0- txout0+ red even pixel data (lsb) re0 txin0 51 symbol terminal function symbol symbol no to ltm201m1 interface ( cn1 ) output signal device input signal device input pin 2nd lvds transmitter ( ds90c383, ds90c385 ) signal interface www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..- .0%&- product information product information 5.3 lvds interface(2) 5.3.1 odd pixel data (1st pixel data) rxo3- rxo3+ no. 10 no. 11 a3m a3p red odd pixel data ro6 r16 4 blue odd pixel data bo5 b15 87 blue odd pixel data bo4 b14 88 blue odd pixel data bo3 b13 89 rxo2- rxo2+ no. 5 no. 6 a2m a2p blue odd pixel data bo2 b12 90 rxo1- rxo1+ no. 3 no. 4 a1m a1p blue odd pixel data bo1 b11 91 blue odd pixel data (msb) bo7 b17 85 rxo3- rxo3+ no. 10 no. 11 a3m a3p blue odd pixel data bo6 b16 86 blue odd pixel data (lsb) bo0 b10 92 green odd pixel data go5 g15 95 green odd pixel data go4 g14 96 rxo1- rxo1+ no. 3 no. 4 a1m a1p green odd pixel data go3 g13 99 green odd pixel data (msb) go7 g17 93 rxo3- rxo3+ no. 10 no. 11 a3m a3p green odd pixel data go6 g16 94 green odd pixel data go2 g12 100 rxo1- rxo1+ no. 3 no. 4 a1m a1p green odd pixel data go1 g11 1 green odd pixel data (lsb) go0 g10 2 rxo0- rxo0+ no. 1 no. 2 a0m a0p red odd pixel data ro5 r15 5 rxo3- rxo3+ no. 10 no. 11 a3m a3p red odd pixel data (msb) ro7 r17 3 red odd pixel data ro4 r14 6 red odd pixel data ro3 r13 7 red odd pixel data ro2 r12 8 red odd pixel data ro1 r11 9 rxo0- rxo0+ no. 1 no. 2 a0m a0p red odd pixel data (lsb) ro0 r10 10 symbol terminal function symbol symbol no to ltm201m1 interface ( cn1 ) output signal device input signal device input pin lvds transmitter ( ds90c387 ) signal interface www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..- .0%&- product information product information 5.3.2 even pixel data (2nd pixel data) rxe3- rxe3+ no. 22 no. 23 a7m a7p red even pixel data re6 r26 76 blue even pixel data be5 b25 59 blue even pixel data be4 b24 60 blue even pixel data be3 b23 61 rxe2- rxe2+ no. 18 no. 19 a6m a6p blue even pixel data be2 b22 62 rxe1- rxe1+ no. 15 no. 16 a5m a5p blue even pixel data be1 b21 63 blue even pixel data (msb) be7 b27 57 rxe3- rxe3+ no. 22 no. 23 a7m a7p blue even pixel data be6 b26 58 blue even pixel data (lsb) be0 b20 64 green even pixel data ge5 g25 69 green even pixel data ge4 g24 70 rxe1- rxe1+ no. 15 no. 16 a5m a5p green even pixel data ge3 g23 71 green even pixel data (msb) ge7 g27 65 rxe3- rxe3+ no. 22 no. 23 a7m a7p green even pixel data ge6 g26 66 green even pixel data ge2 g22 72 rxe1- rxe1+ no. 15 no. 16 a5m a5p green even pixel data ge1 g21 73 green even pixel data (lsb) ge0 g20 74 rxe0- rxe0+ no. 12 no. 13 a4m a4p red even pixel data re5 r25 77 rxe3- rxe3+ no. 22 no. 23 a7m a7p red even pixel data (msb) re7 r27 75 red even pixel data re4 r24 78 red even pixel data re3 r23 79 red even pixel data re2 r22 80 red even pixel data re1 r21 81 rxe0- rxe0+ no. 12 no. 13 a4m a4p red even pixel data (lsb) re0 r20 84 symbol terminal function symbol symbol no to ltm201m1 interface ( cn1 ) output signal device input signal device input pin lvds transmitter ( ds90c387 ) signal interface www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..- .0%&- product information product information 5.3.3 timing diagrams of lvds for transmitting lvds receiver : integrated t-con note (1) r/g/b[7]s are msbs and r/g/b[0]s are lsbs. www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..- .0%&- product information product information 5.4 back light unit note (1) the high voltage po wer terminal is thick line. (2) the low voltage power terminal is thin line. connector : jst 2pin) bh sr-02vs-1 or equivalent jst 5pin) bhsr-05vs-1 or equivalent 2 yellow power supply for lamp 5(low voltage) lv 5 2 black power supply for lamp 6(low voltage) lv 4 nc nc 3 1 blue power supply for lamp 5(high voltage) hv 2 1 gray power supply for lamp 6(high voltage) hv 1 cn3 2 white power supply for lamp 4(low voltage) lv 2 1 white power supply for lamp 4(high voltage) hv 1 cn4 2 white power supply for lamp 3(low voltage) lv 2 1 white power supply for lamp 3(high voltage) hv 1 cn2 2 yellow power supply for lamp 2(low voltage) lv 5 2 black power supply for lamp 1(low voltage) lv 4 nc nc 3 1 blue power supply for lamp 2(high voltage) hv 2 1 gray power supply for lamp 1(high voltage) hv 1 cn1 note color description symbol pin no www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..- .0%&- product information product information 5.5 input signals, basic display colo rs and gray scale of each color b255 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue b254 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 b253 1 1 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 : : : : : : : : : : : : : : : : : : b3~ b252 : : : : : : : : : : : : : : : : : : b2 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 b1 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 dark ? - light b0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black gray scale of blue g255 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 green g254 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 g253 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 1 0 0 0 0 0 0 0 0 : : : : : : : : : : : : : : : : : : g3~ g252 : : : : : : : : : : : : : : : : : : g2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 g1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 dark ? - light g0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black gray scale of gree n r255 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 red r254 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 r253 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 1 : : : : : : : : : : : : : : : : : : r3~ r252 : : : : : : : : : : : : : : : : : : r2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 r1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 dark ? - light r0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black gray scale of red - 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 white - 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 yellow - 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 magent a - 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 red - 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 cyan - 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 green - 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue - 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black basic colo r b7 b6 b5 b4 b3 b2 b1 b0 g 7 g6 g 5 g 4 g3 g 2 g 1 g0 r7 r6 r5 r4 r3 r2 r1 r0 blue green red gray scale level data signal display (8bit) colo r note (1) definition of gray : rn : red gray, gn : green gray, bn : blue gray (n = gray level) input signal : 0 = low level vo ltage, 1 = high level voltage www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..- .0%&- product information product information 6. interface timing 6.1 timing parameters ( de only mode ) - clocks 1004 920 872 t h horizontal total - clocks 840 840 840 t hd active display period horizontal display term - lines 1100 1080 1059 t vb vertical total - lines 1050 1050 1050 t vd active display period vertical display term - hz 62.5 59.5 56.5 f v vsync - khz 69.3 64.8 60.4 f h hsync - mhz 63 60 57 1/t c frequency clock note unit max. typ. min. symbol item signal note (1) this product is de only m ode. the input of hsync & vsync signal does not have an effect on normal operation. (2) test point : ttl control signal and cl k at lvds tx input terminal in system (3) internal vcc = 3.3v qymdml www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..- .0%&- product information product information 6.2 timing diagrams of interface signal ( de only mode ) data signals de t vd t v t h d clk t c de t hd t vb 0.5 v cc t es t ds t dh t ch t cl t c de display data d clk 0.5 v cc 0.5 v cc www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..- .0%&- product information product information 6.3 power on/off sequence to prevent a latch-up or dc operation of the lcd module, the power on/off sequence should be as the diagram below. t1 : v dd rising time from 10% to 90% t2 : the time from v dd to valid data at power on. t3 : the time from valid data off to v dd off at power off. t4 : v dd off time for windows restart t5 : the time from valid dat a to b/l enable at power on. t6 : the time from valid data off to b/l disable at power off. ? the supply voltage of the external system for the module input should be the same as the definition of v dd . ? apply the lamp voltage within the lcd oper ation range. when the back light turns on before the lcd operation or the lcd turn s off before the back light turns off, the display may momentarily show abnormal screen. ? in case of v dd = off level, please keep the level of input signals low or keep a high impedance. ? t4 should be measured after the module has been fully discharged between power off and on period. ? interface signal should not be kept at high impedance when the power is on. 300 k? t1 ? 10msec 0 ? t2 ? 50msec 0 ? t3 ? 50msec 1sec ? t4 back-light (recommended) 500msec ? t5 100msec ? t6 www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..- .0%&- product information product information 6.4 vdd power dip condition note (1) the above conditions are fo r the glitch of the input voltage. (2) for stable operation of an lcd module power, please follow them. i.e., if typ vdd x 80% ? vcc ? typ vdd x 90%, then t d should be less than 20ms. t d v cc v dd gnd 90% 80% 4.5v ? v dd ? 5.5v if v dd (typ.) x 80% ? v cc ? v dd (typ) x 90% then, 0

1bhf @-5..- .0%&- product information product information 7. outline dimension [ refer to the next page ] www.datasheet.co.kr datasheet pdf - http://www..net/
www.datasheet.co.kr datasheet pdf - http://www..net/
www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..- .0%&- product information product information (a) when the module is assembled, it s hould be attached to the system firmly using all mounting holes. be carefu l not to twist and bend the module. (b) because the inverter uses high volt ages, it should be disconnected from power source before it is assembled or disassembled. (c) refrain from strong mechanical s hock and / or any force to the module. in addition to damage, it may cause improper operation or damage to the module and ccft back light. (d) note that polarizer films are ve ry fragile and could be damaged easily. do not press or scratch the surfac e harder than a hb pencil lead. (e) wipe off water droplets or oil immediat ely. if you leave the droplets for a long time, staining or discoloration may occur. (f) if the surface of the polarizer is dirty, clean it using absorbent cotton or soft cloth. (g) desirable cleaners are water, ip a (isopropyl alcohol) or hexane. do not use ketone type materials (ex. ac etone), ethyl alcohol, toluene, ethyl acid or methyl chloride. it might cause perm anent damage to the polarizer due to chemical reaction. (h) if the liquid crystal mate rial leaks from the panel, it should be kept away from the eyes or mouth . in case of c ontact with hands, legs or clothes, it must be washed away with soap thoroughly. (i) protect the module from static, or the cmos gate array ic would be damaged. (j) use finger-stalls with soft gloves in order to keep display clean during the incoming inspection and assembly process. (k) do not disassemble the module. (l) do not pull or fold the lamp wire. (m) do not adjust the variable resistor located on the module. (n) protection film for polarizer on the modul e should be slowly peeled off just before use so that the electrostati c charge can be minimized. (o) pins of i/f connector should not be touched directly with bare hands. 8. general precautions 8.1 handling www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..- .0%&- product information product information 8.2 storage (a) do not leave the module in high temper ature, and high humidity for a long time. it is highly recommended to store the module with temperature from 0 to 35 ? and relative humidity of less than 70%. (b) do not store the tft-lcd m odule in direct sunlight. (c) the module should be stored in a dark plac e. it is prohibited to apply sunlight or fluorescent light in storing. 8.3 operation (a) do not connect or disconnect the m odule in the "power on" condition. (b) power supply should always be turned on/off by the item 6.3 "power on/off sequence" (c) module has high frequency circuits. su fficient suppression to the electromagnetic interference should be done by system manufacturers. grounding and shielding methods may be important to minimize the interference. (d) the cable between the back light connec tor and its inverter power supply should be connected directly with a minimi zed length. a longer cable between the back light and the inverter may caus e lower luminance of lamp(ccft) and may require higher startup voltage(vs). 8.4 operation condition guide (a) the lcd product should be operated under normal conditions. normal condition is defined as below; - temperature : 20 ? 15 ? - humidity : 65 ? 20% - display pattern : continually changing pattern (not stationary) (b) if the product will be used in extreme conditions such as high temperature, humidity, display patterns or operati on time etc.., it is strongly recommended to contact sec for application engineeri ng advice. otherwise, its reliability and function may not be guaranteed. extreme conditions are commonly found at airports, transit stations, banks, stock market, and controlling systems. www.datasheet.co.kr datasheet pdf - http://www..net/
1bhf @-5..- .0%&- product information product information 8.5 others (a) ultra-violet ray filter is necessary for outdoor operation. (b) avoid condensation of water. it may resu lt in improper operation or disconnection of electrode. (c) do not exceed the absolute maximum ra ting value. ( supply voltage variation, input voltage variation, variation in part contents and environmental temperature, and so on) otherwise the module may be damaged. (d) if the module keeps disp laying the same pattern fo r a long period of time, the image may be "sticked" to the screen. to avoid image sticking, it is recommended to use a screen saver. (e) this module has its circuitry pc b's on the rear side and should be handled carefully in order not to be stressed. (f) please contact sec in advance when you display the same pattern for a long time. www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of LTM201M1-L01

	To Download LTM201M1-L01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .